september 2011 doc id 022222 rev 1 1/7 7 BTA10-600GP 10 a triac features low i h : ? 13 ma max high surge current: ?i tsm = 120 a i gt specified in four quadrants insulating voltage: ? 2500 v (rms) (ul recognized: e81734) description the BTA10-600GP uses high performance, glass passivated chips. the insulated to-220ab package, the high surge current and low holding current make this product well adapted to cfl and led dimmer applications. a2 a1 g a2 a1 g to-220ab www.st.com
characteristics BTA10-600GP 2/7 doc id 022222 rev 1 1 characteristics table 1. absolute ratings (limiting values) symbol parameter value unit v drm v rrm repetitive peak off-state voltage t j = 125 c 600 v i t(rms) rms on-state current (360 conduction angle) t c = 90 c 10 a i tsm non repetitive surge peak on-state current (t j initial = 25 c) t p = 8.3 ms 126 a t p = 10 ms 120 i 2 ti 2 t value for fusing t p = 10 ms 72 a 2 s di/dt critical rate of rise of on-state current i g = 500 ma di g /dt = 1 a/s repetitive f = 50 hz 10 a/s non repetitive 50 t stg t j storage junction temperature range operating junction temperature range -40 to +150 -40 to +125 c table 2. electrical characteristics symbol test conditions quadrant value unit i gt (1) v d = 12 v (dc) r l = 33 t j = 25 c i - ii- iii max 25 ma iv max 100 v gt v d = 12 v (dc) r l = 33 t j = 25 c i - ii - iii - iv max 1.5 v v gd v d = v drm r l = 3.3 k t j = 110 c i - ii - iii - iv min 0.2 v t gt v d = v drm i g = 500 ma di g /dt = 3 a/s t j = 25 c i - ii - iii - iv typ 2 s i l i g = 1.2 i gt t j = 25 c i - ii - iii typ 20 ma iv 40 i h (1) i t = 100 ma gate open t j = 25 c max 13 ma v tm (1) i tm = 14 a t p = 380 s t j = 25 c max 1.5 v i drm i rrm v drm = v rrm t j = 25 c max 0.01 ma t j = 110 c max 0.5 dv/dt (1) linear slope up to v d = 67% v drm gate open t j = 110 c min 30 v/s typ 100 (dv/dt)c (1) (di/dt)c = 2.2 a/ms t j = 110 c min 1 v/s typ 10 1. for either polarity of electrode a 2 voltage with reference to electrode a 1 .
BTA10-600GP characteristics doc id 022222 rev 1 3/7 table 3. gate characteristics (maximum values) symbol parameter value unit p g(av) average gate power dissipation 1 w p gm peak gate power dissipation t p = 20 s 10 w i gm peak gate current t p = 20 s 4 a v gm peak positive gate voltage t p = 20 s 16 v table 4. thermal resistances symbol parameter value unit r th(j-a) junction to ambient 60 c/w r th(j-c) dc junction to case for dc 4 r th(j-c) ac junction to case for 360 conduction angle (f = 50 hz) 3 figure 1. maximum rms power dissipation versus rms on-state current figure 2. maximum rms power dissipation and maximum allowable temperatures (t amb and t case ) f = 50 hz, curves are cut off by (di/dt) c limitation for different thermal resistances heatsink + contact figure 3. on-state rms current versus case temperature figure 4. relative variation of thermal impedance versus pulse duration 1e-3 1e-2 1e-1 1e+0 1e+1 1e+2 5e+2 0.01 0.1 1 zth/rth zth(j-c) zth(j-a) tp(s)
characteristics BTA10-600GP 4/7 doc id 022222 rev 1 figure 5. relative variation of gate trigger current and holding current versus junction temperature figure 6. non repetitive surge peak on-state current versus number of cycles figure 7. non repetitive surge peak on-state current and corresponding value of i 2 t figure 8. on-state characteristics (maximum values) sinusoidal pulse width t p < 10 ms
BTA10-600GP package information doc id 022222 rev 1 5/7 2 package information epoxy meets ul94,v0 cooling method: conduction recommended torque value: 0.4 to 0.6 nm in order to meet environmental requirements, st offers these devices in different grades of ecopack ? packages, depending on their level of environmental compliance. ecopack ? specifications, grade definitions and product status are available at: www.st.com . ecopack ? is an st trademark. table 5. to-220ab dimensions ref. dimensions millimeters inches min. typ. max. min. typ. max. a 15.20 15.90 0.598 0.625 a1 3.75 0.147 a2 13.00 14.00 0.511 0.551 b 10.00 10.40 0.393 0.409 b1 0.61 0.88 0.024 0.034 b2 1.23 1.32 0.048 0.051 c 4.40 4.60 0.173 0.181 c1 0.49 0.70 0.019 0.027 c2 2.40 2.72 0.094 0.107 e 2.40 2.70 0.094 0.106 f 6.20 6.60 0.244 0.259 ?i 3.75 3.85 0.147 0.151 i4 15.80 16.40 16.80 0.622 0.646 0.661 l 2.65 2.95 0.104 0.116 l2 1.14 1.70 0.044 0.066 l3 1.14 1.70 0.044 0.066 m2.60 0.102 c b2 c2 f ? i l a a1 a2 b e b1 i4 l3 l2 c1 m
ordering information BTA10-600GP 6/7 doc id 022222 rev 1 3 ordering information 4 revision history table 6. ordering information order code marking package we ight base qty delivery mode BTA10-600GPrg bta10 600gp to-220ab 2.3 g 50 tube table 7. document revision history date revision changes 13-sep-2011 1 initial release
BTA10-600GP doc id 022222 rev 1 7/7 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a parti cular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. unless expressly approved in writing by two authorized st representatives, st products are not recommended, authorized or warranted for use in milita ry, air craft, space, life saving, or life sustaining applications, nor in products or systems where failure or malfunction may result in personal injury, death, or severe property or environmental damage. st products which are not specified as "automotive grade" may only be used in automotive applications at user?s own risk. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2011 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com
|
